Test Materials
This product color change is divided into 2 separate categories:
- Color Change: color change before and after testing
- Color Stain: color stain on materials that are not dyed and in contact with the test product.
The AATCC crockmeter test cloth is made of AATCC standard white cotton, specialized for testing the color fastness of fabrics in dry or wet conditions, color fastness is assessed according to the AATCC standard gray scale.
The AATCC test fabric is suitable for all types of textiles
AATCC Wash Load Ballast Type 3 used to ensure sufficient washing capacity is provided in the washing machine. Weight compensating fabric properly simulates washing of samples in a washing machine to provide uniform tests and increased repeatability.
- This product color change is divided into 2 separate categories:
- Color Change: color change before and after testing
- Color Stain: color stain on materials that are not dyed and in contact with the test product.
The JIS gray scale is an indispensable item in the garment industry, used to check the color change of products after going through physical, mechanical and chemical influences, which is called COLOR FAST.
Application of JIS Cotton L0803:
- JIS Cotton L0803 is a standard single-fiber white fabric used for JIS color fastness testing
Application of Wool JIS L0803:
- Wool JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
Application of Silk 2-1 JIS L0803:
- Silk 2-1 JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
Application of Silk 2-2 JIS L0803:
- Silk 2-2 JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
Application of Nylon JIS L0803:
- Nylon JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
Application of Polyester JIS L0803:
- Polyester JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
Application of Multifiber JIS L0803:
Multifibre adjacent fabric DW James Heal for a variety of Color Fastness tests, these fabrics are manufactured with the necessary composition to comply with the requirements of ISO 105 F10, in accordance with the AATCC test method James Heal makeweights, also known as 'ballast' or 'loading fabrics' are used to make up the load in washing, dry cleaning, dimensional stability, drying or durability tests Abrasive sponges are used for abrasion testing machines, Pre-cut with 38mm diameter round pieces. James Heal detergents, which are used for both colour fastness and shrinkage testing. Following the relevant regulations as specified in both American, European, and International standards.
James Heal Phenolic Yellowing Test Kit, redictive phenolic yellowing test kit is designed to assess the potential for either white or pastel-coloured yarns, fabrics or garments to suffer from ‘yellowing.’ This is often a common occurrence amongst light coloured fabrics which can be caused due to both chemical and environmental factors, and fabric ageing. James Heal Grey Scale used to evaluate color change and staining during color fastness testing. Both scales are used for visual evaluation to allow you to assign a rating from 1 to 5 GB/T 7568.2-2008 cotton test fabric can be used in colorfastness tests to evaluate the degree of color transferred as Single-fiber Adjacent Fabric.
- SDCE Laboratory chemicals for use in BS EN ISO 105 E-Series. SDC Enterprises Limited provides a range of chemicals for the test methods in the BS EN ISO 105: E-Series of tests.
- Chemicals for use in BS EN ISO 105 E02: Colour Fastness to Sea Water. 250g Pack – Sodium Chloride for use in this test method in 250g tubs.