Refond

1. Water amount (level) automatic control: ±2L.
2. Water temperature automatic control: ±1°C.
3. Agitation speed automatic control: ±2spm.
4. Spin speed: ±3rpm.
5. Washing time: ±10seconds.
6. Spin time: ±10seconds.
7. Loading capacity: 10.5kg max.
8. Language: English/Chinese.
9. Door safe switch.
10. LED indicators signals

1. 7” Touchscreen Operation, easy to use.
2. Working Positions: 9 positions (or 3 positions for option)
3. Abrasion Stoke Length: 24±0.5mm,60.5±0.5mm.
4. Load Weight: 9kPa, 12kPa adding weights.
5. The rotational frequency of the drive unit: outer driving unit,47.5±2.5rpm，Inner driving unit, 44.5±2.4rpm..
6. Pressing Weight: 2.5±0.5kg.
7. Pressing Weight Diameter: 120±10mm.

1. Specimen rack rotation speed：40±2rpm
2. Temperature range: Room Temp. to 97ºC
3. Temperature accuracy: ± 0.5ºC
4. Rate of temperature rise: Max. 2ºC/min
5. Internal materials: Stainless Steel 316L
6. Safety Device: Safety door switch, Over-temperature protector, Low water level protection.
7. Automatic Water Inlet and Draining.
8. 20 units of 550mL containers
9. 20 units of 1200mL containers

Characteristics of random clumping tester RF3192N:

1. RF3192N Random Pilling Tester is a Randomly Rolled Ball Tester, the test fabric and cotton fabric are introduced into the testing room with a soft plastic fabric sheet, the steel wheel rotates at a steady speed, and at the same time, compressed air is introduced inside to let the test fabric roll over the plastic fabric sheet to determine the jumping and feathering properties of the textile fabric.
2. Applicable to most types of textiles.
3. The RF3192N is designed for two traditional test boxes.

1. The Universal Tensile Tester RF-US5KL is designed to test a wide range of materials for tension, compression, flexure, shear and peel properties.
2. Test scope: Knitted, Woven, nonwoven, leather, paper, etc.
3. Core components such as loadcells, ball screws, and motors use high quality parts to ensure test accuracy and precsision.

1. The Universal Tensile Tester RF-UD10KL is designed to test a wide range of materials for tension, compression, flexure, shear and peel properties.
2. Crosshead can automatically move to different gauge length, no need of manual adjustment.
3. Loadcells are automatic detected.

1. The Universal Tensile Tester RF-US5K is designed to test a wide range of materials for tension, compression, flexure, shear and peel properties.
2. Scope： Knitted, Woven, nonwoven, leather, paper, etc.
3. Fixtures are embedded with chips containing information about the fixture. System can identify them and prevent mismatch of fixtures during use.

1. Universal Tensile Tester RF-UD10K equipment three cameras are installed on the base platform and the crosshead. Two are used to monitor and detect speciment slippage at the clamp face. One is used for recording the test.
2. Crosshead can automatically move to diferent gauge length, no need of manual adjustment.
3. Cameras record the whole test procedure for future reference and reduces arguments.

Extracting position: Triple.
RF-F018C have extraction tube- 12mm (OD), 10 mm (ID).
Plunger Weight (including test weight): 1kg.
Power: 230V AC, 50HZ, 3.15A.
Overall Dimension: 500(L) × 120(W) ×380(H)mm.
Weight: Approximate 7kg.

Test cups moving speed：2rpm.
RF4319 test cup：8 units.
Power：AC 230V，50Hz/60Hz.
Dimension： 810(L)×410(W)×250(H)mm.
Weight：Approximate 17kg.

1. Air Permeability Tester RF4308E included testing device, different size of test heads, vacuum pump and micro computer.
2. Control the pressure difference between the two sides of the specimen accurately.
3. Automatically calculate the air permeability index
4. Touchscreen operation
5. Testing ranges automatic selection.
6. PC softwware for data collection and testing report output.
7. Differential pressure testing function for mask testing is built in.

1. Test Solution Apply：0.03-0.45ml selectable.
2. Applicable test solution Accuracy: ± 0.003ml.
3. RF4008 MMT: test time can be set
4. Loading weight：1.0kg, 1.5kg, 2.0kg can choose.
5. Improved test sensors for better conductivity and correlation test results.
6. Dynamic water spread diagram is displayed.''Grading mode: GB, AATCC scoring method.

1. Specimen Size：100mm x 100mm (Max. 120mm x 120mm)
2. Sample Template: 100mm × 100mm ± 1mm
3. RF4008MDT use Precision Camera
4. LED Illumination
5. PC Software
6. Data Transfer：USB cable
7. Test Report：Automatic saved and easy print

1. Crease Recovery Tester is used to test a fabric specimen which folded under a predetermined load in a preset of time then release, transfer the specimen to the recovery scale’s specimen holder. Record the crease recov-ery angle.
2. Crease Recovery Tester RF3301 included folding stand, loading weight, crease recovery scale tester and specimen holder.