SDC
- This product color change is divided into 2 separate categories:
- Color Change: color change before and after testing
- Color Stain: color stain on materials that are not dyed and in contact with the test product.
Applications of AATCC standard blue wool:
Use the AATCC Blue Wool Standard to standardize and test the brightness of blue wool specified in the AATCC performance test methods. This standard is approved for measuring 20 AFU or 5 AFU fading. L2, Lot 9.
Brand: AATCC
Origin: USA
Product code:
- 38362B: Light weight strength standard of blue wool
Applications of SDCE blue wool fabric test for color fastness:
- The SDCE Blue Wool Light Fastness Test is a series of 8 wool fabrics dyed with a specialist blue dye to produce blue wool fabrics with light fastness ranging from very low to very high. This forms a scale from 1 to 8, where 1 is the worst light fastness, to 8 is the best light fastness.
- Use grey codes to assess colour change, correlating with performance in use. This is used to estimate suitability for end use; normal garments should achieve a minimum of level 4 while garments should achieve a level 6. These are used in the ISO 105 B test series and can be used in conjunction with Humidity Control scents for machine calibration.
- Brand: SDCE.
- Origin: UK.
- SDCE Laboratory chemicals for use in BS EN ISO 105 E-Series. SDC Enterprises Limited provides a range of chemicals for the test methods in the BS EN ISO 105: E-Series of tests.
- Chemicals for use in BS EN ISO 105 E02: Colour Fastness to Sea Water. 250g Pack – Sodium Chloride for use in this test method in 250g tubs.
SDCE Test Materials use of these fabrics will provide a simple and effective way for laboratories, either test houses or manufacturers in-house facilities, to implement verification or control procedures for their testing. The verification of the consistency of lab results can be assessed, over time, or between labs, technicians and pieces of equipment. The range can also be a useful addition to the assessment and training of technicians, or they can be used as control fabrics to ensure test procedures are conducted correctly or equipment is performing as expected.
- SDCE Metameric Samples designed to illustrate illuminant metamerism.
- Comprising of 4 cotton swatches the product can be used to clearly demonstrate illuminant metamerism displayed under typical light sources: D65, TL84 and Tungsten.
SDCE Fluorescence Suppressor is a laminated glass plate used to overcome optical interference from fluorescent brightening agents on textile, leather and paper. This is essential when grading assessment is carried out on an item containing optical brightening agents.
SDCE Cotton Lawn is use in testing the Wet and Dry Rubbing Fastness of textiles ISO 105 X12 and Shower Resistance tests. It can be purchased by the meter, in a 5 metre pack or as cut pieces in the following sizes: 5cm x 5cm and 10cm x 20cm.
SDCE Cotton Drill is used to produce bags for the Dry Cleaning test ISO 105 D01.
ISO 105-F05. Adjacent Fabric Acrylic is use as an adjacent fabric when testing fabrics for Colour Fastness to washing and wet contact tests, ISO 105 Group C and Group E.
Major Advantages of SDCE Multifibre SLW:
- Ribbon construction for economy, ease of handling and stability in use.
- Identification weave built-in to enable easy recognition.
- Stringent Quality Control.
- Product authentication and quality guarantee, delivered via SDCE security thread.
ISO 105-F03. This fabric can also be known by its commercial name Nylon 6,6. Adjacent Fabric Polyamide Nylon 6.6 is use as an adjacent fabric when testing fabrics for Colour fastness to washing and wet contact tests ISO 105 Group C and Group E.
ISO 105-F04 Adjacent Fabric Polyeste is use as an adjacent fabric when testing fabrics for Colour fastness to washing and wet contact tests, ISO 105 Group C and Group E.
- Brand: SDCE.
- Origin: UK.
- Product codes and packing of White Pigmented PVC Foil:
- 1855: White Pigmented 10 x 4 cm 300 piece pack.
Adjacent Fabric Viscose use as an adjacent fabric when testing fabrics for Colour fastness to washing and wet contact tests ISO 105 Group C and Group E.
Adjacent Fabric Wool use as an adjacent fabric when testing fabrics for Colour fastness to washing and wet contact tests ISO 105 Group C and Group E.
SDCE Sewing Threads suitable for use in the preparation of test samples.
- Polyurethane tubes as specified in BS EN ISO 12945
- SDCE Pilling Tubes used in abrasion testing.
SDCE Nickel Detection Kit has been designed as a quick in-house swab test to check for the Nickel ions from components that will come into direct and prolonged contact with skin.
SDCE Phenolic Yellowing test kit is fully set up for testing to evaluate the ability of textiles to change color, fall yellowing during transportation, storage or sweat exposure.
SDCE Wool Abradant testing and quality control are carried out at the yarn stage, after weaving of the greige fabric and the final finished abradant cloth. This ensures excellent correlation and conformity, not only within the production batch, but also between different production batches.
SDCE Polyetherurethane Foam is custom manufactured to the ISO specification. (Many items currently available are inferior/non-conforming off the shelf foams of Polyesterurethane type, which have different hardness and chemical properties.) To ensure improved shelf life and reduce yellowing through exposure to UV radiation in daylight, it is heat-sealed in a Black UV-stable Polythene pack.
SDCE Felt Pads produced to ensure the consistent weight and thickness specified in the standard, this ensures that the testing will achieve excellent correlation when used in combination with the full range of SDC Martindale consumables. Both products are available in ready cut discs of 90mm and 140mm.
SDCE Cotton Limbric is use as an adjacent fabric when testing fabrics for Colour Fastness to washing and wet contact tests ISO 105 Group C and Group E.