VIEN VIEN SERVICE TRADING COMPANY LIMITED

Address: 185 Road No. 5, Phuoc Binh Ward, Thu Duc City, HCM City, VN

Hotline: (+84) 0 348580234  -  (+84) 0 763031275

Email: sales@vienvienco.com 

  4. Taber S-35 Grinding Wheel
    Taber S-35 Grinding Wheel

Taber S-35 Grinding Wheel

  • Product Category: Taber Abrading Wheels
  • Manufacturer: Taber
  • Code:

    S-35

    • Warranty 12 months
    • Delivery
    • Caring thoughtful
    • 24/7 support
    • Standard: DIN-53754/53799/53109, ASTM-D3884, ISO5470-1
Specification of Taber S-35 Grinding Wheel:
  1. Taber S-35 Grinding Wheel, 1 pair / box, divided into left and right grinding wheels, respectively marked as " LEFT", "RIGHT", Packed in a special plastic box
  2. Type: Tungsten Carbide
  3. Model: S-35
  4. Brand: Taber
  5. Origin: USA
Feature of Taber S-35 Grinding Wheel:
Manufactured out of tungsten carbide, the periphery of the S-35 consists of sharp helical teeth (1 mm pitch x 45° spiral pitch angle).  The teeth combine both a cutting and tearing action, which provides a very severe abrasion.  Intended for use only on resilient materials such as rubber, linoleum, and leather.  S-35 wheels may be cleaned using a soft brass bristle brush.

Delivery method: Nationwide.
     - Free in city. HCM
     - In the station or express delivery if the customer in outside the province (customers pay shipping costs themselves)
Commitment to customers:
==> Supplying genuine goods (CO / CQ attached), 100% new (with the original belt)
==> Ensure customer's interests when buying products while in warranty, and maintenance for life.
=============== ///=============

VIEN VIEN SERVICE TRADING CO., LTD
Address: 185 Road No. 5, Phuoc Binh Ward, Thu Duc City, Ho Chi Minh City, VN
Tell:  (+84) 0 348580234  -  (+84) 0 763031275
Email : sales@vienvienco.com

Product Other

Price: Contact us

Taber CS-0 Grinding Wheel, A resilient wheel containing no abrasive particles.  Intended for use when a very mild abrasive action is required, or for wet tests such as determining the relative abrasion of dental pastes, cleaning powders, or similar compounds.  Adhesive sandpaper strips can be adhered to the periphery of the CS-0 wheel to evaluate the abrasion resistance of high-pressure decorative laminates and other products.  CS-0 wheels have an expiration and should not be used after the date printed on the label.

100% Genuine

Price: Contact us

Taber H-22 Grinding Wheel, The H-22 vitrified wheel produces an extreme abrasive action.  It has been used to test rubber, linoleum, leather, deep pile fabrics (such as automobile floor coverings) and concrete.

100% Genuine

Price: Contact us

Taber S-42 Sandpaper Strip Grinding Wheel, An open coat sandpaper that is cut to 12.7mm x 160 mm strips and includes a pressure sensitive adhesive to attach the strip to the periphery of CS-0 (S-32) resilient wheels.  The S-42 consists of a very fine aluminum oxide grit, graded as 180 ANSI-CAMI which has an average particle size that is approximately 78µm (0.00304 inches).  The paper is an "A" weight which satisfies the paper grammage requirement of 70 - 100 g/m².  To maintain the rate of abrasion, the sandpaper strips must be changed after a defined number of test cycles (typically 200 or 500).  Applications include high pressure decorative laminates, wood flooring, plastics, furniture surfaces, paints and varnishes. 

100% Genuine

Price: Contact us

Features of Taber S-11 sandpaper:
The usage time of Taber S-11 sandpaper is only 1 time of fine-tuning. Regardless of whether the disc has been used for 25 or 50 cycles, the regrind disc should be discarded. Re-grinding with a used disc may change the wear factor of the wheel faces and invalidate your test results.

100% Genuine

Price: Contact us

Features and parameters of Taber ST-11 grinding wheel:
Tabe ST-11 grinding wheel is used to resurface the wheel. The ST-11 grinding wheel is a 4" diameter x 1/4" thick vitrified product with a 1/4" center hole and has both sides manufactured to a 180 grit grit (usually specified as "good"). Original ST -11 refinished stones are duplex stones with one side 180 grit and the opposite side 80 grit.

100% Genuine

Price: Contact us

Taber H-38 Grinding Wheel, A non-resilient, vitrified abrading wheel comprised of fine abrasive particles that produces medium abrasive action.  Designed to operate with 250 or 500 gram loads, the principal use of this wheel is to test woven and non-woven fabrics.  Must be refaced using the Taber Wheel Refacer and multi-point diamond tool.

100% Genuine

Price: Contact us

Taber Aluminum Wheel, A solid aluminum wheel that can be used by itself or to apply an abrasive strip.

100% Genuine

Price: Contact us

Taber S-33 Sandpaper Strip Grinding Wheel, A closed coat sandpaper that is cut to 12.7mm x 160mm strips and includes a pressure sensitive adhesive to attach the strip to the periphery of CS-0 (S-32) resilient wheels.  The S-33 consists of an extra fine aluminum oxide grit, graded as 360 FEPA which has an average particle size that is approximately 40.5µm (0.00159 inches).  The paper is an "A" weight which satisfies the paper grammage requirement of 70 - 100 g/m².  To maintain the rate of abrasion, the sandpaper strips must be changed after a defined number of test cycles (typically 200 or 500).  Applications include vitreous and porcelain enamels, paints, metallic coatings, and furniture surfaces.

100% Genuine

Price: Contact us

Taber CS-10 Grinding Wheel, This resilient wheel offers a medium abrading action like that of normal handling, cleaning, and polishing.  This popular wheel has been used to evaluate a variety of materials including organic coatings, plastics, textiles, leather and paper products.  Reface with the S-11 refacing disc.

100% Genuine

Page 1 of 2 1 2 >